AFS610 Hydraulic Puller-Tensioner

The AFS610 offers 31,500 lbf (140 kN) of pulling or tensioning capacity and is designed for stringing one rope or one conductor. The bull-wheel grooves on the AFS610 are made from high resistance interchangeable nylon sectors.

Part Number: 21001192
DOT: 21034500

AFS610 Hydraulic Puller-Tensioner
Pulling Rope Clamp - AFS610 Hydraulic Puller-Tensioner
Negative Brake - AFS610 Hydraulic Puller-Tensioner
Controls - AFS610 Hydraulic Puller-Tensioner
Hydraulic Tool Circuit - AFS610 Hydraulic Puller-Tensioner


Puller Performance
Max Pull 31,500 lbf (140 kN)   
Speed at max pull 1.1 mph (1.7 km/h)
Max Speed 2.5 mph (4 km/h)
Pull at max speed 13,500 lbf (60 kN)
Tensioner Performance
Max Tension 31,500 lbf (140 kN)
Max Speed 2.5 mph (4 km/h)
Note: the basic machine performance is calculated at 68°F (20°C) and at sea level
Bull-wheel diameter 59 1/16 in (1,500 mm)
Max conductor diameter 1 9/16 in (40 mm)
Max rope diameter 15/16 in (24 mm)
Weight 14,991 lbs (6,800 kg)

Diesel 130 hp (97 kW)
Hydraulic Transmission
Closed hydraulic circuit that allows stepless speed variation in both rotating directions. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
General Specifications
Net Weight 14,991 lbs (6,800 kg)
Overall Length 198 in (5,030 mm)
Overall Width 98 in (2,500 mm)
Height 116 in (2,950 mm)