ARS709 Hydraulic Puller

The ARS709 offers 45,000 lbf (200 kN) of pulling force and is designed for stringing one rope up to 15/16 inch (24 mm) in diameter. The bull-wheel grooves on the ARS709 are made from heat treated steel. The machine is completely electronically controlled.

 

ARS709 Hydraulic Puller

Specifications

Performance
Max pull 44,962 lbf (200 kN)
Speed at max pull 1.4 mph (2.3 km/h)
Max speed 2.8 mph (4.5 km/h)
Pull at max speed 22,930 lbf (102 kN)
Note: the basic machine performance is calculated at 68°F (20°C) and at sea level
Characteristics
Bull-wheel diameter 23 5/8 in (600 mm)
Max rope diameter 15/16 in (24 mm)
Weight 13,228 lbs (6,000 kg)

Engine
Diesel 209 kW (280 hp)
Cooling system water
Electrical system 24 V
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
General Specifications
Net Weight 13,228 lbs (6,000 kg)
Overall Length 169 in (4,285 mm)
Overall Width 89 in (2,270mm)
Height 108 in (2,750 mm)