ARS711 Hydraulic Puller

The ARS711 offers 40,500 lbf (180 kN) of pulling force respectively and is designed for stringing one rope up to 15/16 inch (24 mm) in diameter. The bull-wheel grooves on the ARS711 are made from heat treated steel.

Note: Detachable in modular units <7,055 lbs (<3,200 kg) for helicopter transportation. The trailer is not included (optional).

Part Number: 21035100 Trailer

ARS711 Hydraulic Puller
ARS711 Power Unit and Bull-wheels on Trailer
ARS711 Power Unit and Bull-wheels on Trailer
Cable Remote Control

Specifications

Performance
Max pull 40,500 lbf (180 kN)
Speed at max pull 1.5 mph (2.4 km/h)
Max speed 2.9 mph (4.7 km/h)
Pull at max speed 20,000 lbf (89 kN)
Note: the basic machine performance is calculated at 68°F (20°C) and at sea level
High Speed Mode
Max pull 27,000 lbf (120 kN)
Speed at max pull 2.0 mph (3.2 km/h)
Max speed 4.0 mph (6.4 km/h)
Pull at max speed 13,500 lbf (60 kN)
Note: the basic machine performance is calculated at 68°F (20°C) and at sea level
Characteristics
Bull-wheel diameter 23 5/8 in (600 mm)
Max rope diameter 15/16 in (24 mm)
Work unit weight 6,393 lbs (2,900 kg)
Power unit weight (dry) 5,512 lbs (2,500 kg)
Power unit weight (with fluid) 6,063 lbs (2,750 kg)
Kit lifting beam and anchors 463 lbs (210 kg)
Trailer (optional) 6,614 lbs (3,000 kg)

Engine
Diesel 286 hp (213 kW)
Cooling system water
Electrical system 24 V
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.