ARS802 Hydraulic Puller

The ARS802 offers 54,000 lbf (240 kN) of pulling force and is designed for stringing one rope up to 1 1/4 inches (32 mm) in diameter. The bull-wheel grooves on the ARS802 are made from heat treated steel. The unit is completely electronically controlled.

Part Number: 21001472

ARS802 Hydraulic Puller
1150 - ARS802 Hydraulic Puller
DLR300 Electronic Pull and Speed Recorder - ARS802 Hydraulic Puller


Max pull 54,000 lbf (240 kN)
Speed at max pull 1.6 mph (2.5 km/h)
Max speed 2.8 mph (4.5 km/h)
Pull at max speed 29,225 lbf (130 kN)
Note: the basic machine performance is calculated at 68°F (20°C) and at sea level
Bull-wheel diameter 31 1/2 in (800 mm)
Max rope diameter 1 1/4 in (32 mm)
Weight 20,944 lbs (9,500 kg)

Diesel 375 hp (280 kW)
Cooling system water
Electrical system 24 V
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
General Specifications
Net Weight 20,944 lbs (9,500 kg)
Overall Length 200 in (5,080 mm)
Overall Width 99 in (2,515 mm)
Height 145 in (3,685 mm)