ARS919 Hydraulic Puller

The ARS919 offers 80,900 lbf (360 kN) of pulling force respectively and is designed for stringing one rope up to 1 3/8 inch (35 mm) in diameter. The bull-wheel grooves on the ARS919 are made from heat treated steel.

Note: Detachable in modular units <7,055 lbs. (<3,200 kg) for helicopter transportation. The trailer is not included (optional).

ARS919 Hydraulic Puller
Cable Remote Control

Puller Specifications

Performance
Max pull 80,900 lbf (360 kN)
Speed at max pull .68 mph (1.1 km/h)
Max speed 1.99 mph (3.2 km/h)
Pull at max speed 28,100 lbf (125 kN)
Note: the basic machine performance is calculated at 20°C and at sea level
Characteristics
Bull-wheel diameter 31 1/2 in (800 mm)
Max rope diameter 1 3/8 in (35 mm)
Front capstan unit 3,748 lbs (1,700 kg)
Rear capstan unit 3,748 lbs (1,700 kg)
Gear frame unit 5,809 lbs (2,635 kg)
Work unit total weight 13,305 lbs (6,035 kg)
Power unit weight (dry) 5,512 lbs (2,500 kg)
Power unit weight (with fluid)  6,063 lbs (2,750 kg)
Kit lifting beam and anchors 463 lbs (210 kg)
Trailer (optional) 6,614 lbs (3,000 kg)

Engine
Diesel 280 hp (209 kW)
Cooling system water
Electrical system 24 V
Hydraulic Transmission
Closed hydraulic circuit for stepless speed variation in both rotating directions. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur. A set of hoses connect power unit with the operating machine.